Saturday, January 7, 2017

Kitchen Cabinets

This is a follow-up to my last post on the bathroom cabinets. Redoing those gave me courage to refinish our kitchen cabinets. We have a big kitchen. I counted our cabinets, and we have 11 drawers and 27 cabinet doors, so this was a big undertaking.


I had some time off of work coming up, so I planned to get it all done during that time. I almost did it, too. If only the sanding had taken less time. I only planned for one day of sanding, but ended up taking three.

The process was essentially the same as the bathroom cabinets. First I took all the doors and drawer faces off, then the hinges and handles (which ended up taking about two hours just for that). This time I left the slides on, though, because the soft close slides take a lot more effort to take off / put on than the ones we have in the bathroom. Then I sanded.

All the doors and drawer faces off and sanded (along the wall)
I bought a quarter sheet sander, and spent three part days (about 4-6 hours each day was all I could take) sanding the cabinet doors and drawer faces, and then the faces of the cabinets themselves. It was quite an undertaking, and I listened to the cast recording of Hamilton about four times. Kristen helped me wipe them down, then I taped down plastic to the dining room and living room floors where the drawers/doors would be.


My original plan was to do two coats the first day - one first thing in the morning, and then one about 8 hours later. However, the first coat ended up taking me about 5 hours, instead of the expected 2-3, so that was out. I did the second coat on day 2 (took about 3.5 hours that time), then took a break on day 3 and did the third coat on day 4 (about 2 hours). I then finished off with the final coat on day 6 (about 2 hours).

After one coat
Four coats, before I painted the sides of the cabinets
I let them dry for five days before applying the two top coats. I decided to apply the finish on one side and let it dry before flipping it over, instead of using the painter's pyramids to do both sides in one pass. That way, there would be no marring of the finish from handling it (though it added some time). I originally wanted to finish the cabinets before Christmas, but that didn't happen. So then I wanted to be done before we left for Portland on the 29th - also didn't happen. But I did get two coats on the front and one coat on the back before we left. After we got back to Minnesota, I did the final coat and reattached everything.

Shiny topcoat v. no topcoat
Now, I also have laminate portions of the cabinets. Instead of real wood, they put up laminate on the some of the sides. For that, I put on two coats of General Finishes Milk Paint (the Dark Chocolate color matches their Java Gel Stain), then added a couple topcoats of the polyurethane gel (even though the paint says it doesn't need a topcoat). And there we have it - refinished kitchen cabinets! Here are a couple angles.